Archive for the ‘Project Management’ Category

Managing the lifecycle of smart meter from initial planning and process development to installation and to on-going operation and maintenance

Learning Lab at PGE Offers Something for Everyone involved in AMI

Posted by Utilimetrics on July 11, 2011

AMI experts at Portland General Electric, one of the most forward-thinking utilities in the U.S., are preparing an insightful and dynamic Learning Lab for Utilimetrics Thursday, July 28. Tentatively, the Learning Lab is divided into six segments. News Link spoke with the PGE staff members who are developing the learning lab.

The first segment will focus on smart metering at PGE. “We plan to explain the entire smart metering project,” states Dean Smith, project communications manager. “We completed the deployment and are in the operational phases. We will cover the business case, vendor selection process, meter deployment, tower and network deployment, and lessons learned getting it through to the operational phase.”

This segment will include business process improvements PGE made, including various changes that involved process automation. “These were coupled with the smart metering installation, so we could immediately leverage the benefits from the system through a series of business process improvements,” continues Smith. “We will share the benefits and value these improvements have provided, as well as some of the lessons learned.”

Eric Spack, AMI project director is the featured speaker in the first segment. Spack will discuss the AMI project, including major milestones and a major lesson learned, “plan to re-plan.” Spack will talk about the importance of communicating with customers and how to avoid generating ill will that could expand into an “opt out” initiative or consumer push-back situation. He will discuss the “care and feeding” of the call center before and after deployment.

“Another important element is focusing and prioritizing the business process and IT software development initiatives,” explains Spack. His message: “You will underestimate this effort, and you will get a late start.” He will then discuss how to recover and make sure the most critical items get done first, in order to ensure project success and maximize the return on investment.

The second segment’s focus is the mass deployment and customer relations elements of smart metering. “We will drill down to meter deployment – what the deployment practices were, how they went, what we learned, and what the customer relations component of the whole deployment process looked like,” states Smith.

Jamie Swails, manager, Network Data Operations Segment will speak in the third segment. “We will provide information on our organization and what we do,” states Swails. “We will then explain some of the lessons learned and areas of concern. For example, what is our volume of exceptions? How many people do we have dealing with exceptions? What are some of the unexpected operational impacts related to hosting the system?” Swails plans to talk about billing, since the exceptions can carry through to billing. “There were some heavy impacts to our billing department that were not anticipated as part of the project,” she explains. “Currently, we are reading 800,000+ meters over the air. We are able to provide 99 percent of the readings on-time to our billing department.” Swails will share other anticipated challenges. One relates to maintaining all of the data, such as data privacy concerns, scalability concerns, and how this amount of data will affect department heads. “I will also discuss what it means to be a steward of that meter data,” she states.

The fourth segment covers a number of subtopics, including meter data management (MDM). “We will talk about our MDM system, how the end-to-end processing of data through our MDM system into our enterprise system takes place, and what we have learned about integrating these systems together to create an effective end-to-end system,” states Smith.

The fifth segment focuses on energy recovery and related field operations. “We will talk about what we are learning about how to use the system in the field,” says Smith. Areas where PGE is receiving benefits include energy recovery, theft detection, and line losses. “We are also looking at new ways to leverage the system, such as transformer-level metering and fault detection,” he continues. “Not only do we have a business case that anticipated certain benefits tied in with business process automation, but we are finding there are other things we can do with the system that, as people become more familiar with the data and how to use it, can be of additional value on the operational side.”

Segment six is about future-related smart grid initiatives. “Here, we will share some of our smart grid thinking, such as how smart metering ties into a smart grid application, including distribution automation,” states Smith. “We are doing some pilot projects in this area.”

One of the featured speakers in this segment is Conrad Eustis, director of Retail Technology Development who will discuss the appliance’ interface. By the end of July, it should be ready to go to a standards organization. Eustis will also discuss EPRI’s “Plugfest,” which demonstrates the interoperability of the standard. And, he will talk about the future of the smart grid in general.

The Learning Lab is more than just PGE people standing up and talking, though. “We are also going to do some ‘show and tell’ on our distribution generation control center, our MDM, and other elements,” notes Smith.

Prior to the Learning Lab, PGE will ask participants about specific topics they would like covered. “We want this to be as relevant to participants as possible,” emphasizes Smith. “We will present information, and leave time for people to interact and drill down.”

And for participants who want to continue learning, on Friday, July 29 PGE operations personnel and other experts are available to meet individually with participants and discuss areas of specific interest.

The fee for participation is $295 for Utilimetrics members and $395 for nonmembers. For information or to register, click here.

Thanks to the Learning Lab sponsors: Sensus and Wellington Energy.

Posted in Autovation, Deployment, Education, Emerging Technology, Meter Data Management, Pre-Deployment, Project Management, Smart Grid, Smart Meters | Leave a Comment »

Utilimetrics Smart Utility Marketplace Offers Unique Search Engine

Posted by Utilimetrics on June 21, 2011

When utility technology leaders are ready to buy, they turn to Utilimetrics’ Smart Utility Marketplace to cut through the clutter of traditional search engine results. Imagine blending an internet search engine with the structure of the Yellow Pages. It’s all there with the Smart Utility Marketplace

Within the Marketplace, users easily locate products and services unique to our industry without the clutter of a general Internet search engine. Additionally, the Marketplace offers another fantastic feature – a Product Showcase that allows users to view specific products and special offers right on the front page of the guide.

Users have the option of performing keyword-driven searches, or a category-specific search. Both methods produce the most industry-relevant results on the Web, and the Marketplace is updated and corrected continuously, unlike a printed directory that is often outdated by the time it is printed. Experience how much more convenient it is to toggle from the online guide to spreadsheets and other web data than refer back to print directories.

The Smart Utility Marketplace allows you to search for specialized providers of desired goods or individual products. In addition, the downloadable Desktop Search application enables you to search for items directly from a small search window on your computer desktops, making the search process as convenient and time-efficient as possible. You’ll have instant, one-click access to the buyers guide and the Utilimetrics website at any time.

For suppliers, there are many advantages to advertising in the Smart Utility Marketplace, including cost and flexibility. For a small administrative fee a supplier company can prominently display its company logo, offer complete contact information, and provide a detailed company description and profile page. And, online content can be updated within seconds at any time, with no added cost. If you’d like more information on advertising options, contact Utilimetrics’ partner, MultiView, Inc., at 800-816-6710 or Utilimetrics@multiview.com.

From a user’s perspective, the procurement of resources for your business or facility can be the key to success within the industry. Whether you’re looking for supplies and services, or simply the essential tools and accessories you need to satisfy your customers, the Smart Utility Marketplace can help. It’s a powerful online tool that will help change the way you search for industry related resources. Why not try it for yourself? Start your search at the Utilimetrics homepage (www.utilimetrics.org), and click on the Smart Utility Marketplace.

Posted in Autovation, Clean Technology, Cybersecurity Issues, Demand Response, Deployment, Emerging Technology, Home Area Networks, Meter Data Management, Pre-Deployment, Project Management, Smart Grid, Smart Meters, Transmission and Distribution Technologies, Water utilities | Leave a Comment »

Innovation is the Name of the Game at Autovation Host Utility DC Water

Posted by Utilimetrics on May 20, 2011

The District of Columbia Water and Sewer Authority, now known simply as DC Water, has a fairly broad agenda designed to help the organization evolve. It is being spearheaded by George S. Hawkins, general manager, who was named to his position in September 2009. Before that, Hawkins was director of the District Department of the Environment, an agency that performs city, county and state environmental functions for the nation’s capital.

The agenda is being driven by some significant issues that Hawkins sees as facing DC Water and the water utility industry in general. “Those of us in the industry understand well the vital nature of what we deliver for every living organization,” he states. “We also understand just how poor the condition of the infrastructure is in most places, including here.” However, he points out, very few consumers really understand what the utilities do. “Few people know where the water comes from when they turn on the faucet or where it goes once it goes down the drain,” he states. “As a result, the financial model that we utilize is broken. If people don’t understand what we do, it is very difficult to raise the kind of revenue we need to invest and improve the system.”

In response, DC Water has created a comprehensive program designed to respond to these challenges. There are two elements to the program. One involves providing more and better external communication with customers. The other involves providing better service to customers through internal improvements.

Communications

The first step was the organization’s rebrand. “We wanted a name, logo, and tagline that would make us much more visible and easily accessible,” he explains. The new name is “DC Water.” The logo is a green “DC” with a large blue water drop. The tagline is “Water is Life.”

Next is a very aggressive use of every communication media that DC Water staff can utilize. A key element of this involves constantly updating the utility’s website. Each month, DC Water provides a report card on its performance indicators, such as how often it achieves first-call resolution when customers call, how quickly it answers calls, how many water main breaks it experiences, how quickly it repairs these water main breaks, how many of its fire hydrants are out of service, how well it meets its environmental obligations, and so on. “We also have a Facebook page, and we are on YouTube and Twitter,” continues Hawkins.

In Spring 2011, when DC Water proposed its rates for the 2012 budget, the law required that it hold a public hearing. DC Water went above and beyond that requirement. “We held dozens of meetings, with virtually every audience we could think of,” reports Hawkins. “We didn’t want to shy away from anyone. We wanted to go out and tell our story – what we are doing and why it matters to people. Our belief is that, the more the public understands what we do, the more we hope they will understand and support the kind of revenue we need.”

Service

The other side of the program focuses on what DC Water can do to improve the internal workings of the organization, so it can improve the service it provides to customers and do so more cost-effectively.

There are three prongs to this:

  1. The Team Blue Project is what Hawkins defines as “classic organization development.” “We selected a series of issues that everyone cares about,” he explains. The most important two are safety and asset management. There is a cross-functional and cross-organizational team in place for each of the issues. Members include employees from every level of the organization and across the various disciplines of the organization. The teams are empowered to come up with recommendations on what DC Water should do. It is then senior management’s responsibility to implement as many of these recommendations as possible. There are two purposes for Team Blue. One, of course, is to improve the organization. The other is to provide employees with the opportunity to participate more in the organization.
  2. “We will launch the second prong this summer,” continues Hawkins. It is tentatively called the DC Water Science and Innovation Program (SIP), a formal mechanism designed to allow and encourage all employees throughout the organization to come up with ideas on how DC Water can do anything better – answering phones, filling out permits, turning valves, digging in the streets, managing nutrients at the wastewater treatment plant, and so on. These ideas can be on any scale – large to small. “An idea might be a way to do our jobs better for the same money, or actually save money doing the same job,” he notes. DC Water wants to collect these ideas, then highlight them on a website where people can vote for the ideas they think are good. The ideas will then be reviewed by a panel of experts, and if an idea is selected and implemented, DC Water will provide visible recognition to the employee who came up with the idea. “We haven’t figured out yet if we can legally do this, but perhaps we can provide employees with financial bonuses,” says Hawkins.
  3. The third prong is a very aggressive program, primarily, but not exclusively, with IBM. DC Water is working with IBM on “Smart Water,” which is an outgrowth of IBM’s “TheSmarterCity” program. “We will be designing analytical products that can take the kind of information that we already collect and use it to make smarter decisions, such as anticipating problems and predicting maintenance,” reports Hawkins. One example might be information that will allow the utility to know which pipe might break next. This will allow crews to select and plan work more intelligently. “IBM is working with us and developing some new software products for this,” he adds.

Results

Although these initiatives are all relatively new, DC Water is already seeing some impressive results.

On the communications side: “There is no question that the public is already more aware of who we are and what we are doing,” he states. “While we still get complaints, we are getting a lot more support. We also have much better relationships with local political leaders.”

On the service side: DC Water is receiving a lot of good ideas from employees that are coming in informally, in advance of the formal launching of the SIP. “Someone came up with an idea of how to use credit cards differently for some past debts,” states Hawkins. “This has helped us save several hundred thousand dollars.” An engineer came up with a better idea for fixing water line breaks that is saving the utility several million dollars. “We are also saving enormous amounts of money in personnel and gasoline costs by implementing a first-of-its-kind automatic meter reading program for our water valves, which are now read electronically,” he explains.

Autovation

DC Water is a host utility for Autovation 2011 Sept. 25-28 in Washington, DC. Hawkins will discuss these innovations during the Autovation Opening General Session Monday, Sept. 26. Hawkins also plans to talk about how he thinks the water utility industry needs to innovate and be flexible in terms of the products that it sells, not just how it does the work. Examples: There are millions of people who visit Washington each year. Most of these people, when they drink water, are drinking bottled water. “In essence, we have ceded that market to private bottled water companies,” he admits. The question: “What kind of device and apparatus can we come up with in order to get people to use public water, and in a way that we can capture some revenue?” he queries.

DC Water occasionally invents things to make its wastewater treatment plants work better. The question: “Can we monetize these products by joint-venturing with a private firm, so that not only are we providing innovation to our operations, but also increasing our sources of revenue?” he asks.

Hear Hawkins discuss many of the great innovations happening at DC Water, then see some of them in action at the Bryant Street Facility tour Wednesday, Sept. 28. Check out the Autovation website for information.

Utilimetrics is the world’s premier utility technology association, providing advocacy for utilities and information about innovative technologies that lead to improved operations, customer service and resource utilization. The association brings industry professionals together to share lessons learned, best practices and future needs. Utilimetrics focus is on the deployment of intelligent technology and enhanced utility operations to best serve customers. For more information go to: www.utilimetrics.org

Posted in Autovation, Clean Technology, Deployment, Education, Emerging Technology, Project Management, Smart Meters | Leave a Comment »

Profile: SCE’s AMI/MDM Smart Grid Strategy

Posted by Utilimetrics on April 29, 2011

Southern California Edison is regulated by the California Public Utilities Commission, which mandated SCE and the other two IOUs in the state to implement smart metering programs.

SCE responded by creating an advanced meter infrastructure project called Edison SmartConnect, which will replace approximately 5 million electric meters for residential and commercial customers below 200 kilowatts in demand with “next generation” smart meters by the end of 2012.

“The goal is an infrastructure that will enable utility companies to partner with their customers to lower peak demands,” explains David Erickson, director of IT and Business Integration, Edison SmartConnect. “We can do this by providing information and data to customers that they have never had before.”

For example, residential and commercial customers will be able to see their usage in 15-minute and hourly increments, respectively, and can see usage patterns. The system will also be able to provide customers with time-of-use peak and off-peak rates.

“Customers can sign up for us to turn off their air conditioning during certain events and receive incentives,” he adds.

The System

Each morning at 8 a.m., customers who are “hooked up” can see their usage for the time period of the previous midnight and back. This provides them with 720 reads per month (24 daily reads x 30 days), rather than the traditional one they receive with their monthly bills.

Getting the system up   and running has been and continues to pose challenges. SCE has a 50,000 square-mile service territory, with 14 million customers and 5 million actual accounts. “We will have smart meters in all five million accounts,” reports Erickson.

As can be imagined, a lot of logistics has been involved in developing the Edison SmartConnect program, from the initial planning of how SCE was going to deploy the meters to how it would stage warehousing activities, as well as how it would strategically work through its service territory, district by district.

“We are replacing about approximately 6,500 meters a day,” states Erickson. “However, there have been days where we replaced 10,000 and even 12,000 meters.” Between September 2009 and April 2011, SCE has deployed about 2.5 million meters. It will have the remaining meters deployed by the end of 2012.

The Technology

Besides the logistical considerations, there is also the technical systems infrastructure to consider. This involves collecting, processing, validating, loading, and storing of data, so customers can access the information to use for energy management purposes, and so SCE can access it for billing purposes. The technology includes a Network Management System (NMS), a Meter Data Management (MDM) system, and the smart meters themselves.

The NMS collects the data from the meters, communicating with them using a local area mesh network that feeds up into a cellular network. “We send a command to the meter to request usage data,” he states. “The meter sends the data back through the network.” It then goes to a cell tower, and from there comes back to SCE’s data computer center, where the NMS receives the data from all the meters.

SCE sends the commands out about 1 a.m. each morning to all meters. However, the information comes back at different times. About 50% are back by 2 a.m., and 99.9% are back by 6 a.m. 

The NMS then passes the information on to the MDM, which takes the interval data and makes sure the information is valid. “If we don’t get data back from certain meters, we estimate the gaps in the interval data,” he explains. For each account, SCE will correlate the data and run it against the rate that it has for each customer. This will provide the determinant to create the bill. This data is then passed back to SCE’s legacy mainframe billing system that it has had for many years. The billing system then creates the bill.

Once the data is validated by the MDM, it is also sent to the data warehouse. “We have a separate system and we store it in the data warehouse,” states Erickson. As a result, when customers log onto the SCE website at 8 a.m. they can directly access SCE’s data warehouse to view their usage. 

The MDM also allows SCE to remotely turn service on and turn off, instead of having to send a field service rep out to do so. “This takes about eight seconds,” he reports. 

Interval Billing

A key element of Edison SmartConnect is interval billing. “Interval billing is driven by the MDM,” explains Erickson. “The complexity of this begins with the business requirements that we had to satisfy with our system to provide the capabilities we wanted.” SCE had about 2,500 specific internal business requirements, which translated into over 5,000 system requirements. This translated into about 2,000 test scripts and about 7,000 test conditions. “We also did ‘performance of scale’ testing,” he continues. “These systems are built for certain throughputs and thresholds by the vendors. However, we wanted to make sure they would perform with the numbers we needed – five million meters. We didn’t want to make an investment like this and find out down the road that there would be problems that would prevent us from doing more metering or billing.”

SCE began testing the interval billing in January 2010 and began implementation in October 2010. Currently, SCE has about 150,000 accounts that are part of the interval billing program. “By late summer, we expect about one million customers to be getting their bills with interval billing,” he states. “I will talk a lot more about this testing during the Utilimetrics webcast May 4.”

Benefits

Obviously, the most important benefit of Edison SmartConnect will be the ability to reduce peak demand requirements. “It will also help us with the interface between smart meters and the outage management system, which we will be starting in June 2011,” states Erickson.

Furthermore, it will help SCE prepare for the future implementation of “home area network” technology, which will allow customers to have in-home digital displays for energy management and will tie into the smart meters and programmable thermostats.

Join Erickson Wednesday, May 4 at 12:30 p.m. Central for a webcast on Edison SmartConnect’s Meter Data Management System. Click here to register or for more information. The webcast is free for Utilimetrics members.

Posted in Autovation, Deployment, Education, Meter Data Management, Pre-Deployment, Project Management, Public Policy, Smart Grid, Smart Meters | 1 Comment »

Dismantling the Myths about Smart Meters for Electric Customers

Posted by Utilimetrics on April 4, 2011

As any utility in the deployment or post-deployment stage can attest, there is much more to a successful installation than purchasing the right technology and ensuring it is successfully installed. Customer acceptance is vital; without it, utilities may face uphill public battles. And for some utilities, those battles are very painful.

Customer reluctance ranges from letters to the editor to protests to refusing to allow the meter change outs. Some communities have formed groups to fight the installation of smart meters.

Why all the hostility against a technology that has been proven to help consumers monitor energy and conserve valuable resources? Myths! There are a number of myths surrounding smart meters, and although none have been validated, many consumers believe them.

The three most common “myths” are:

  1. Smart meters cause health problems because of the radio waves or electromagnetic waves
  2. Smart meters will compromise a family’s security and privacy
  3. Smart meters will cause rates to increase

Health Issues

“The claimed health effects of radio frequency is a burning topic these days,” notes Ralph Abbott, founder of Plexus Research – SAIC. “There are groups of people who believe that we live in a ‘soup’ of RF energy, or EMFs, that can cause cancer. Sources of concern include televisions, microwave ovens, and cell phones.”

To date, there is no documentation that this is true. According to Ralph, most of the research has been commissioned by the cell phone industry. As a result, some people claim this is industry-biased.

Things are different with smart meters. The reason is that individuals can make the decision whether or not to use a cell phone. “They can’t decide to reject having a smart meter installed,” notes Ralph. “The citizens of Marin County, California, have outlawed smart metering, and there are county statutes against any further deployment.” In addition, some citizens have petitioned the California PUC to halt all further deployment of smart meters in the state. However, there is a legal battle going on over this, according to Ralph, because the Federal Communications Commission (FCC) reserves the right to make determinations about health matters.

Utilities need to find a way to separate rumor, speculation, and junk science from real science that is conducted by qualified people, according to Ralph. “Most of the work done on this, though, is by utility agencies, he states.  ”Authoritative reports are available to consumers showing that the levels of radiation are absolutely miniscule, especially compared to cell phones.” However, he adds, consumers can simply say they are biased, because they are written by the utility industry.

Recently, the California Council on Science and Technology came out with a report showing there is no problem. “Fortunately, the CCST report has an impressive list of academics and scientists who are not part of the utility industry, making it as objective as possible,” notes Ralph. “As a result, this report is starting to have some positive impact around the country.”

Security/Privacy Issues

According to Andrew Brock, president of Rio Tronics, considering the increases in credit card fraud, identify theft, and Internet information being compromised, it is understandable consumers may have concerns about privacy and security issues related to smart meters. “In response, some regulators are saying that, while aggregate data can be made available publicly, data on individual consumers should only be made available to those consumers,” he states. “Utilities should also emphasize to customers just how secure the data is because it is well encrypted.”

“One thing smart metering does is determine usage every hour or 15 minutes,” notes Ralph. “This can provide information on whether someone is home, so if a nefarious individual was able to access this data, they could try to figure out if you were home.” However, according to Ralph, this information isn’t particularly useful, because usage levels will change if heating or air conditioning go on or off, and this can occur whether the person is home or not. In addition, he adds, NIST (National Institute of Standards and Technology) is creating cybersecurity standards that will require data to be encrypted and afforded a number of other forms of protection.

Billing Issues

According to Andrew, there have been a couple of studies done on the question of smart meter accuracy by a California utility to help allay its customer concerns. “The studies confirmed smart meters accurately record usage, the systems are correctly processing data, and there are no systemic issues, other than a few exceptions,” he reports.

However, he adds, some additional details were missing. “For example, the utility should have explained to customers that the electro-mechanical meters being replaced by smart meters could have been running slower over time,” notes Andrew. “As a result, bills might have increased because of the improved accuracy of the smart meter.” The utility should have also explained that the deployment of the smart meters coincided with a heat wave, and this caused some customers to assume that the smart meters were at fault for their increased bills. “Third, there were also some incorrectly applied rates that are now being corrected,” he adds.

When educating customers about smart meter accuracy issues, Andrew believes the industry should emphasize the data they will be getting will eventually allow them to reduce their bills by better managing their usage.

General Strategies

While there are some specific approaches the industry can take when dealing with the myths, Andrew believes strategies can and should be similar for all three concerns. He recommends five steps:

  1. Listen to your customers’ concerns and needs. Ignoring them will only make things worse.
  2. Educate your customers with information related to their concerns.
  3. Prepare the proper type of pilot program, one that involves customer segmentation, customer education, the opportunity for customer feedback, response to that feedback, and making customers partners rather than adversaries.
  4. Roll out the program slowly, learning along the way.
  5. Finally, offer an opt-out provision. “You will always have those who won’t trust anything you say related to health issues, privacy/security issues, and cost issues, so you can just let them choose not to participate,” states Andrew.

Ralph believes that, by using the right combination of education and other strategies, the industry should be able to calm the concerns of most rational citizens. “However, you may never be able to reach those who are on the fringe,” he admits.

 

Posted in Clean Technology, Demand Response, Department of Energy, Deployment, Education, Emerging Technology, Home Area Networks, Pre-Deployment, Project Management, Public Policy, Smart Grid, Smart Meters | Leave a Comment »

Pepco and DC Water to Serve as Utility Hosts and Featured Speakers at Autovation 2011

Posted by Utilimetrics on March 22, 2011

Utilimetrics is pleased to announce that Pepco and DC Water will serve as host utilities for Autovation 2011.

Joseph M. Rigby, chairman of the board, president and CEO of Pepco Holdings, Inc. (PHI) and George S. Hawkins, general manager of DC Water will be keynote speakers at the Opening General Session, Monday, September 26.

Rigby has worked in the electric utility industry since 1979.  He was elected PHI president and chief executive officer effective March 1, 2009, and was elected chairman of the board May 15, 2009.

PHI provides utility service to approximately 1.9 million customers.  Its service territory includes Washington, DC and suburban Maryland, the Delmarva Peninsula, including Delaware, and southern New Jersey.

Rigby serves on a number of boards, including the U.S. Chamber of Commerce, EEI and Energy Insurance Mutual.  He was recently elected secretary of the Greater Washington Board of Trade.

Rigby earned a B.S. in Accounting from Rutgers University and an MBA from Monmouth University.

George S. Hawkins was named to the general manager post September 3, 2009 by the DC Water board of directors. With an operating and capital budget of nearly $800 million dollars, DC Water provides drinking water delivery and wastewater collection and treatment for a population of more than 600,000 in DC, as well as the millions of people who work in or visit the District. DC Water also treats wastewater for a population of 1.6 million in Montgomery and Prince George’s counties in Maryland, and Fairfax and Loudoun counties in Virginia.

Prior to joining DC Water Hawkins served as director of the District Department of the Environment (DDOE). He held senior positions with the Environmental Protection Agency (EPA) and served Vice President Gore on the National Performance Review.

Hawkins graduated Summa Cum Laude from Princeton University and Cum Laude from Harvard Law School.

“This is a year of firsts for Autovation,” said Joel Hoiland, Utilimetrics CEO. “It’s the first time Autovation has had two utility hosts, and the first time it has had a water utility serve as a host,” he said. “We’re very pleased to have these innovative utilities involved in Autovation 2011. Their willingness to share experiences, lessons learned and best practices will enhance our already exceptional education programming for electric, water and gas utilities,” he continued.

Autovation 2011 is Sept. 25-28 at the Gaylord National Resort and Conference Center.

An Early Announcement will be sent to all members in late-March and information will be available on the Utilimetrics website soon.

 

Posted in Autovation, Clean Technology, Cybersecurity Issues, Demand Response, Deployment, Education, Emerging Technology, Home Area Networks, Meter Data Management, Pre-Deployment, Project Management, Public Policy, SCADA, Smart Grid, Smart Meters, Standards, Transmission and Distribution Technologies, Uncategorized | Leave a Comment »

Autovation 2011 Courses Announced

Posted by Utilimetrics on March 22, 2011

Autovation Courses Announced

Autovation kicks off September 25 with 23 pre-Autovation courses. Courses are four hours each and cover the AMR/AMI lifecycle from pre-deployment to post-deployment. Courses will be led by subject matter experts who are known and respected throughout the industry. Courses are designed for electric, gas and water utility professionals from investor owned utilities (IOUs), cooperative utilities and municipal utilities.

Morning Courses

Course 1              Real-World Lessons in Project Management, Deployment and Operation of Your MDM

Course 2              The People and Processes Needed to Make Your Smart Grid Deployment Work

Course 3              The Intersection of AMI and OMS

Course 4              From Concept to Approval: Creating an Achievable Smart Grid Plan

Course 5              The IT Project Hidden Within Your Smart Grid Initiative

Course 6              All the Things You Wish You Knew Before You Selected and Deployed Smart Meters

Afternoon Courses

Course 7              Smart Grid Engineering & Operations Strategy and Implementation

Course 8              MDM: What is it? How do I use it?

Course 9              AMI Communication Options

Course 10            Effective Smart Grid Project Management

Course 11            How to Manage a Successful Water AMI Project

Course 12            Evaluating the Opportunity for Utility Demand Response

Autovation 2011 will be held Sept. 25-28 at Gaylord National Resort and Convention Center in Washington, DC.

Save the date and plan to attend.  Online registration opens April 1.

 

Posted in Autovation, Cybersecurity Issues, Demand Response, Deployment, Education, Emerging Technology, Meter Data Management, Pre-Deployment, Project Management, SCADA, Smart Grid, Smart Meters, Uncategorized | Leave a Comment »

Smart Grid & Speed

Posted by Utilimetrics on November 6, 2009

Word has it that utilities who were awarded stimulus funds are going to be working at an incredible speed.

Get good ideas for your own efforts by learning from some winners of stimulus funding.

We come right to you with a Nov. 23 webinar for anyone involved in Smart Grid development.

Featured speakers will be Bob Sitkauskas of DTE Energy, Jeff Nichols of Sempra Energy Utilities San Diego Gas & Electric, and Kenny Mercado, CenterPoint Energy.  These grant award winners will discuss the implications of the smart energy grid award program for the utility sector, their technology service providers and consumers.

Click here to learn more and Register for this webinar.

Posted in Deployment, Education, Grants, Pre-Deployment, Project Management, Smart Grid, Smart Meters | Leave a Comment »

 
Follow

Get every new post delivered to your Inbox.